|Type||Viscose aqueous dispersion|
|Density||1.50 +/- 0.05 g/cm3|
|Viscosity at 25ºC||133.000 +/- 15000 cps|
|Drying time 20ºC and 55 % H.R.||2 hours dry to the touch – 8 hours completely. Repainting 8 hours minimum|
|Recommended amount||2 kg/m2 using several layers|
|Tooling||Brush, paint roller|
|Adherence||Perfect over appropriately prepared surfaces|
|Solids weight (%)||61.436|
|Solids per volume (%)||45.669|
|Theoretical density, 20ºC||1.418 g/cm3|
|True density, 20ºC||1.3879 g/cm3|
(25ºC brookfield, spindel nº4, 30r,p.m.)
|Consumo recomendado||1.40 L/m2 (2kg/m2) at 640 microns dry film thickness|
Stir contents thoroughly prior to application. Apply a first layer of rubber coating diluted in 20% of water and extend it to all over the surface.
After 8 hours you can apply a second layer of rubber coating without dilution, leaving a thicker coat. For the next layers you must follow the indicated repainting intervals.
It is recommended to put a glass-fibre reinforcement mesh along the cracks and fissures. To do this and after the first application - when it is still wet - you must put the mesh pressing it with the paint roller so it gets impregnated with the product.
Where the floor meets the wall, you must apply the product up to 25cm over the wall.
If you want to use a glass-fibre reinforcement mesh all over the surface you must place it after the first application - when it is still wet - pressing it with the paint roller so it gets impregnated with the product. Where the floor meets the wall, you must install the mesh up to 25cm over the wall as well as the product.
To ensure a perfect waterproofing it is recommended to use 2 Kg per m2 applied in several layers so there won't be any uncovered area.